If you’re looking to Sell Acterna Fireberd 8000 Module For FST-2000 TestPad

FIREBERD 8000

Take testing to the next level with a single platform for new and legacy requirements

The FIREBERD 8000 combines the success of two highly successful test platforms – the FIREBERD 6000A and the TestPad. As a datacom analysis module for the TestPad, the portable, battery-powered FIREBERD 8000 completes a winning combination in size, flexibility, and test capability.

Highlights

Easy-to-use graphical user interface (GUI) maximizes navigation ability and test efficiency.
Native datacom interfaces for EIA-530, RS-449 (422 and 423), RS-232, X.21, V.35, and V.36 serial interfaces.
Government standards support for MIL-188C and MIL-188-114.
Field-friendly interface module slot supports conditioned diphase module and expandability to new technologies.
Synchronous/asynchronous and DTE/DCE modes of operation.
A full suite of BER patterns with data rate support up to 18 Mbps.
Applications

Verify end-to-end connectivity – Isolate problems to a specific direction by analyzing the performance of an entire digital link in both directions.
Timing analysis – Detect timing problems stemming from propagation delay or incorrectly timed network elements.
DTE and DCE emulation – Test head-to-head with a variety of synchronous and asynchronous datacom network elements.
Quality of Service (QoS) Testing – Standardize test metrics with a variety of results measurements, including Round Trip Delay, G.821, and Pattern Slips analysis.
Key Features

Internal, recovered, and external clock capability.
Clock recovery option enables clock recovery from receive data lead.
Virtual breakout box provides a visual representation of activity on data, clock, and signal leads.
Remote operation and results storage.
Normal, inverted, or auto clock edge selections.
In-band and out-of-band flow control.
“Virtual Breakout Box” Functionality

Easy-to-interpret LEDs on the FB-8000 provide technicians with information regarding the state of the signaling and data leads of the circuit under test, much like a breakout box. In addition, user-controllable signaling leads (CTS, RTS, RLSD, DTR, DSR, RI, TM, RL, and LL) are available. The combination of LEDs and signal lead manipulation allows for complete flow control troubleshooting.

Test Interface Modularity

Like its predecessors, the FB-8000 includes a field-upgradable module slot to support conditioned diphase and future technologies. Therefore, technicians can purchase datacom and conditioned diphase test functionality and enjoy the flexibility of field upgrading the FB-8000 with new JDSU option slot test modules easily and efficiently.

Remote Operation and Results Storage

Removable storage media can be connected through a PC card interface on the FB-8000, facilitating the storage of test results for external reporting and analysis. Results can also be configured to print at the end of a test, periodically during the test, or at any occurrence of an error. Customized printouts are also available showing only the specified results, allowing for quick detection of hard-to-find bit error rate (BER) problems and easy interpretation of test results.

Buying, Selling, Trading Acterna Fireberd 8000

Battery Operation

In keeping with the portable requirements of today’s technicians, the FB-8000 can be battery operated to maximize its portability, particularly in environments where AC power is unavailable or unreliable.

Durability

The FB-8000 was built with ruggedness in mind. The platform meets all of the key MIL-PRF 28800 F standards for operation and storage in harsh environments.

Traffic Generation

The FIREBERD 8000 includes all of the common BER patterns, including the patterns found in the JDSU FIREBERD 6000A and T-BERD product lines. This enables the FB-8000 to run an end-to-end test in conjunction with a FB-6000A, FB-6000, FB-60000M, MC-6000, or FB-4000.

Internal, External, and Recovered Clock Capabilities

The FB-8000 provides the same timing options as the legacy FB-6000: internal, external, interface, and recovered. In balanced V.11 modes, the FB-8000 supports synchronous clocking up to 18 Mb/s. The recovered clocking option also allows the FB-8000 to extract clocking from the receiver data signals up to 10 Mb/s.

Clock and Data Phase Graphing

At high bit rates, processing and propagation delays as well as lengthy cables may result in clock-to-data skew as data signals pass through the various equipment in the network. These delays can lead to clock inversions, difficulty in synchronization, and eventually errors in the data transfer. The clock and data phase graphing feature of the FB-8000 provides a visual indication of the clock versus data phase relationship, providing quick insight into problems without requiring an oscilloscope.

Broken Lead Detection

Some digital circuits will continue to operate correctly when one lead of a balanced (differential) circuit is broken. In these cases, the signal ground lead becomes the return current path, causing reduced fidelity. The broken lead detection feature of the FB-8000 allows technicians to detect broken incoming leads for DTE and DCE modes, eliminating the need for a breakout box to verify lead connectivity on the datacom circuit.

If you’re selling your Acterna Fireberd 8000 please fill out form on the right hand side of page.

If you’re looking to Sell Acterna FST-2310 Module For FST-2000 TestPad

2310 Field Services Module

The JDSU FST-2310 TestPad is an all-in-one testing solution that performs SONET, SDH, T-carrier, data, and circuit-switched testing to meet the varied testing requirements of mobile technicians. Its modular architecture protects long-term investment by providing the flexibility, scalability, and upgradeability to support evolving test needs.

Most tests performed using the FST-2310 can be done in only a few button pushes, without the need to sift through hidden setup menus. Additionally, because technicians need only minimal training to use the FST-2310, testing objectives are addressed quickly and the cost of ownership is significantly reduced.

Key Features:

Application-driven icons
Test application buttons are labeled with icons that clearly depict the way the test is performed on the circuit; for example, select the “MON/THRU” icon when performing circuit-monitoring tests – select the “TERM” icon when performing circuit-terminating tests. The icons and quick setup buttons enable technicians to use the module effectively with very little training.

Simultaneous results analysis for different signal rates
Identify the source of problems quickly by using the FST-2310’s dual results window to analyze results from different signal rates simultaneously. Simultaneous results analysis can also be performed on different signal results (for example, level and bit errors) allowing for easy results correlation and quick problem identification.

Buying, Selling, Trading Acterna FST-2310

Autoconfiguration
Support for autoconfiguration is provided for all key applications. Autoconfiguration is capable of setting different test parameters, such as framing and pattern, as well as detecting the signal’s multiplexed composition. This enables users to reduce the time required for test setup.Additionally, the FST-2310 has the ability to save and store up to 10 test set configurations that can be recalled for future use.

Remote control
Remotely configure tests and analyze results in detail using the remote control GUI option. This allows technicians to conveniently operate the module from a remote location using the FST-2310’s graphical user interface (GUI) on a remote PC. The remote control GUI feature enables technicians to connect to the FST-2310 through the PCMCIA serial or modem card to perform tests and collect test results.

Applications
SONET Analysis
SDH Analysis
DS3 Analysis
DS1 Analysis
DS1/DS3 Jitter analysis
ATM Analysis
GR-303 Protocol Link Analysis
ISDN PRI Testing
Signaling Analysis
Loop-Back Applications

If you’re selling your Acterna FST-2310 please fill out form on the right hand side of page.

If you’re looking to Sell JDSU FST-2000 TestPad w Fireberd 8000 FB8000-DPH

Take testing to the next level with a single platform for new and legacy requirements

The FIREBERD 8000 combines the success of two highly successful test platforms – the FIREBERD 6000A and the TestPad. As a datacom analysis module for the TestPad, the portable, battery-powered FIREBERD 8000 completes a winning combination in size, flexibility, and test capability.

Highlights

Easy-to-use graphical user interface (GUI) maximizes navigation ability and test efficiency.
Native datacom interfaces for EIA-530, RS-449 (422 and 423), RS-232, X.21, V.35, and V.36 serial interfaces.
Government standards support for MIL-188C and MIL-188-114.
Field-friendly interface module slot supports conditioned diphase module and expandability to new technologies.
Synchronous/asynchronous and DTE/DCE modes of operation.
A full suite of BER patterns with data rate support up to 18 Mbps.
Applications

Verify end-to-end connectivity – Isolate problems to a specific direction by analyzing the performance of an entire digital link in both directions.
Timing analysis – Detect timing problems stemming from propagation delay or incorrectly timed network elements.
DTE and DCE emulation – Test head-to-head with a variety of synchronous and asynchronous datacom network elements.
Quality of Service (QoS) Testing – Standardize test metrics with a variety of results measurements, including Round Trip Delay, G.821, and Pattern Slips analysis.
Key Features

Internal, recovered, and external clock capability.
Clock recovery option enables clock recovery from receive data lead.
Virtual breakout box provides a visual representation of activity on data, clock, and signal leads.
Remote operation and results storage.
Normal, inverted, or auto clock edge selections.
In-band and out-of-band flow control.

Buying, Selling, Trading JDSU FST-2000

FST-2000 TestPad Mainframe

The FST-2000 TestPad is the user interface for the TestPad family. The combination of a user interface and an application module represents a complete test tool. This architecture provides TestPad users with the flexibility to invest in additional test modules as their testing needs change, allowing them to capitalize on an investment already made.

The FST-2000 has been designed for mobile technicians to improve the overall installation and troubleshooting process by providing features that are enablers for a total process improvement solution. The FST-2000 employs wireless connectivity, along with a local Web Browser and VT100, allows for storage and transfer of files, all of which enable field technicians to complete their jobs more effectively.

Features:

Remote control via Web Browser makes remote testing and technical support straightforward
Web Browser and VT100 emulator provide access to provisioning systems, while
Web Browser also allows for retrieval of information from the Intranet/Internet
Support of Bluetooth, RS-232, USB-compatible and 10/100BaseT interfaces provide a choice of local connectivity to the TestPad
Support of Ethernet, 802.11b, analog and wireless modems (CDPD, CDMA, etc.) allow for various LAN and WAN connectivity options
Customizable and preconfigured test scripts offer support for closeout tests, ensuring that M&Ps are followed
Storage and transfer of results provide ability to store files on the test set and transfer them to computers and other network locations via file transfer protocol (FTP)
Non-display version offers a lower cost solution for customers that want to rely on laptop’s display for test configuration and retrieval of results

If you’re selling your JDSU FST-2000 please fill out form on the right hand side of page.

If you’re looking to Sell JDSU FST-2802 2000 TestPad FST-2000

FST-2802 Gigabit Ethernet Services Module
The FST-2802 is a handheld Ethernet, Fibre Channel, and IP services test instrument designed to meet the needs of service providers for turning up and troubleshooting these various services. The FST-2802 enables technicians to use one test set to turn up services ranging from 10/100 Ethernet, Gigabit Ethernet, Fibre Channel, and IP – all from a single TestPad module!

Highlights

Full line rate traffic generation with variable traffic load characteristics to stress test 10/100/1000 Mbps Ethernet interfaces.
Ability to test 1.0625 and 2.125 Gbps Fibre Channel services at 100% wire speed.
IP ping and traceroute testing for verification of network connectivity.
Ability to perform IP throughput verification and round trip delay testing.
Filtering capabilities at L2 and L3 enable users to perform circuit troubleshooting.
Dual-port capability for Ethernet and Fibre Channel traffic generation.
BER testing at layer 1 and layer 2 for Ethernet and Fibre Channel circuits.
Loopback frame generation to automatically loop the far-end test at L2 and L3.
Remote graphical user interface (GUI) application for remote testing via an analog modem, Ethernet LAN, 802.11, or Bluetooth.
Custom and preconfigured test scripts ensure that M&Ps are followed.

Applications

Service level agreement (SLA) verification via throughput, frame loss, and round trip delay testing for Ethernet, Fibre Channel, and IP services.
Automated RFC-2544 conformance testing. (Requires another FST-2802 module or loopback device)
Traffic testing with VLAN 802.1Q, 802.1p, DSCP, and TOS prioritization characteristics.
Ping and traceroute testing for verification of network connectivity.
Simultaneous testing of two independent circuits with full line rate traffic generation.

Key Features

Microsoft Windows XP platform with easy-to-use GUI.
Variety of applications such as web browser, PDF reader, and online keyboard.
File transfer protocol (FTP) for storage and transfer of results.
Connectivity methods include RS-232, USB, LAN, Bluetooth, 802.11b, and analog modem.

FST-2000 TestPad Mainframe

The FST-2000 TestPad is the user interface for the TestPad family. The combination of a user interface and an application module represents a complete test tool. This architecture provides TestPad users with the flexibility to invest in additional test modules as their testing needs change, allowing them to capitalize on an investment already made.

The FST-2000 has been designed for mobile technicians to improve the overall installation and troubleshooting process by providing features that are enablers for a total process improvement solution. The FST-2000 employs wireless connectivity, along with a local Web Browser and VT100, allows for storage and transfer of files, all of which enable field technicians to complete their jobs more effectively.

Buying, Selling, Trading JDSU FST-2802

Features:

Remote control via Web Browser makes remote testing and technical support straightforward
Web Browser and VT100 emulator provide access to provisioning systems, while
Web Browser also allows for retrieval of information from the Intranet/Internet
Support of Bluetooth, RS-232, USB-compatible and 10/100BaseT interfaces provide a choice of local connectivity to the TestPad
Support of Ethernet, 802.11b, analog and wireless modems (CDPD, CDMA, etc.) allow for various LAN and WAN connectivity options
Customizable and preconfigured test scripts offer support for closeout tests, ensuring that M&Ps are followed
Storage and transfer of results provide ability to store files on the test set and transfer them to computers and other network locations via file transfer protocol (FTP)
Non-display version offers a lower cost solution for customers that want to rely on laptop’s display for test configuration and retrieval of results

Agilent HFCT-5611 Module

The HFCT-5611 complies with Annex F of the GBIC specification Revision 5.4 and reaches 10 km with 9/125 µm single mode fiber. Both the HFBR-5601 and the HFCT-5611 are Class 1 Eye Safe laser devices. The HFCT-5611 is based on 1300 nm long wavelength Fabry Perot laser technology.

550 m with 50/125 µm MMF
550 m with 62.5/125 µm MMF
10 km with 9/125 µm SMF

Avago AFBR-5601Z Module

The AFBR-5601Z complies with Annex G of the GBIC specification Revision 5.4. In the 1000 BASE-SX environment the AFBR-5601Z achieves 220 m transmission distance with 62.5 µm and 500 m with 50 µm multimode fiber respectively. The AFBR-5601Z has been developed with 850 nm short wavelength VCSEL technology.

500 m with 50/125 µm MMF
220 m with 62.5/125 µm MMF

If you’re selling your JDSU FST-2802 please fill out form on the right hand side of page.

If you’re looking to Sell JDSU Fireberd 8000 FB8000-DPH Datacom Module

FIREBERD 8000

Take testing to the next level with a single platform for new and legacy requirements

The FIREBERD 8000 combines the success of two highly successful test platforms – the FIREBERD 6000A and the TestPad. As a datacom analysis module for the TestPad, the portable, battery-powered FIREBERD 8000 completes a winning combination in size, flexibility, and test capability.

Highlights

Easy-to-use graphical user interface (GUI) maximizes navigation ability and test efficiency.
Native datacom interfaces for EIA-530, RS-449 (422 and 423), RS-232, X.21, V.35, and V.36 serial interfaces.
Government standards support for MIL-188C and MIL-188-114.
Field-friendly interface module slot supports conditioned diphase module and expandability to new technologies.
Synchronous/asynchronous and DTE/DCE modes of operation.
A full suite of BER patterns with data rate support up to 18 Mbps.
Applications

Verify end-to-end connectivity – Isolate problems to a specific direction by analyzing the performance of an entire digital link in both directions.
Timing analysis – Detect timing problems stemming from propagation delay or incorrectly timed network elements.
DTE and DCE emulation – Test head-to-head with a variety of synchronous and asynchronous datacom network elements.
Quality of Service (QoS) Testing – Standardize test metrics with a variety of results measurements, including Round Trip Delay, G.821, and Pattern Slips analysis.
Key Features

Internal, recovered, and external clock capability.
Clock recovery option enables clock recovery from receive data lead.
Virtual breakout box provides a visual representation of activity on data, clock, and signal leads.
Remote operation and results storage.
Normal, inverted, or auto clock edge selections.
In-band and out-of-band flow control.
“Virtual Breakout Box” Functionality

Easy-to-interpret LEDs on the FB-8000 provide technicians with information regarding the state of the signaling and data leads of the circuit under test, much like a breakout box. In addition, user-controllable signaling leads (CTS, RTS, RLSD, DTR, DSR, RI, TM, RL, and LL) are available. The combination of LEDs and signal lead manipulation allows for complete flow control troubleshooting.

Test Interface Modularity

Like its predecessors, the FB-8000 includes a field-upgradable module slot to support conditioned diphase and future technologies. Therefore, technicians can purchase datacom and conditioned diphase test functionality and enjoy the flexibility of field upgrading the FB-8000 with new JDSU option slot test modules easily and efficiently.

Buying, Selling, Trading JDSU Fireberd 8000

Remote Operation and Results Storage

Removable storage media can be connected through a PC card interface on the FB-8000, facilitating the storage of test results for external reporting and analysis. Results can also be configured to print at the end of a test, periodically during the test, or at any occurrence of an error. Customized printouts are also available showing only the specified results, allowing for quick detection of hard-to-find bit error rate (BER) problems and easy interpretation of test results.

Battery Operation

In keeping with the portable requirements of today’s technicians, the FB-8000 can be battery operated to maximize its portability, particularly in environments where AC power is unavailable or unreliable.

Durability

The FB-8000 was built with ruggedness in mind. The platform meets all of the key MIL-PRF 28800 F standards for operation and storage in harsh environments.

Traffic Generation

The FIREBERD 8000 includes all of the common BER patterns, including the patterns found in the JDSU FIREBERD 6000A and T-BERD product lines. This enables the FB-8000 to run an end-to-end test in conjunction with a FB-6000A, FB-6000, FB-60000M, MC-6000, or FB-4000.

Internal, External, and Recovered Clock Capabilities

The FB-8000 provides the same timing options as the legacy FB-6000: internal, external, interface, and recovered. In balanced V.11 modes, the FB-8000 supports synchronous clocking up to 18 Mb/s. The recovered clocking option also allows the FB-8000 to extract clocking from the receiver data signals up to 10 Mb/s.

Clock and Data Phase Graphing

At high bit rates, processing and propagation delays as well as lengthy cables may result in clock-to-data skew as data signals pass through the various equipment in the network. These delays can lead to clock inversions, difficulty in synchronization, and eventually errors in the data transfer. The clock and data phase graphing feature of the FB-8000 provides a visual indication of the clock versus data phase relationship, providing quick insight into problems without requiring an oscilloscope.

Broken Lead Detection

Some digital circuits will continue to operate correctly when one lead of a balanced (differential) circuit is broken. In these cases, the signal ground lead becomes the return current path, causing reduced fidelity. The broken lead detection feature of the FB-8000 allows technicians to detect broken incoming leads for DTE and DCE modes, eliminating the need for a breakout box to verify lead connectivity on the datacom circuit.

If you’re selling your JDSU Fireberd 8000 please fill out form on the right hand side of page.

If you’re looking to Sell JDSU FST-2802 2000 TestPad FST-2000

FST-2802 Gigabit Ethernet Services Module

The FST-2802 is a handheld Ethernet, Fibre Channel, and IP services test instrument designed to meet the needs of service providers for turning up and troubleshooting these various services. The FST-2802 enables technicians to use one test set to turn up services ranging from 10/100 Ethernet, Gigabit Ethernet, Fibre Channel, and IP – all from a single TestPad module!

Highlights

Full line rate traffic generation with variable traffic load characteristics to stress test 10/100/1000 Mbps Ethernet interfaces.
Ability to test 1.0625 and 2.125 Gbps Fibre Channel services at 100% wire speed.
IP ping and traceroute testing for verification of network connectivity.
Ability to perform IP throughput verification and round trip delay testing.
Filtering capabilities at L2 and L3 enable users to perform circuit troubleshooting.
Dual-port capability for Ethernet and Fibre Channel traffic generation.
BER testing at layer 1 and layer 2 for Ethernet and Fibre Channel circuits.
Loopback frame generation to automatically loop the far-end test at L2 and L3.
Remote graphical user interface (GUI) application for remote testing via an analog modem, Ethernet LAN, 802.11, or Bluetooth.
Custom and preconfigured test scripts ensure that M&Ps are followed.

Applications

Service level agreement (SLA) verification via throughput, frame loss, and round trip delay testing for Ethernet, Fibre Channel, and IP services.
Automated RFC-2544 conformance testing. (Requires another FST-2802 module or loopback device)
Traffic testing with VLAN 802.1Q, 802.1p, DSCP, and TOS prioritization characteristics.
Ping and traceroute testing for verification of network connectivity.
Simultaneous testing of two independent circuits with full line rate traffic generation.

Key Features

Microsoft Windows XP platform with easy-to-use GUI.
Variety of applications such as web browser, PDF reader, and online keyboard.
File transfer protocol (FTP) for storage and transfer of results.
Connectivity methods include RS-232, USB, LAN, Bluetooth, 802.11b, and analog modem.

FST-2000 TestPad Mainframe

The FST-2000 TestPad is the user interface for the TestPad family. The combination of a user interface and an application module represents a complete test tool. This architecture provides TestPad users with the flexibility to invest in additional test modules as their testing needs change, allowing them to capitalize on an investment already made.

The FST-2000 has been designed for mobile technicians to improve the overall installation and troubleshooting process by providing features that are enablers for a total process improvement solution. The FST-2000 employs wireless connectivity, along with a local Web Browser and VT100, allows for storage and transfer of files, all of which enable field technicians to complete their jobs more effectively.

Buying, Selling, Trading JDSU FST-2802

Features:

Remote control via Web Browser makes remote testing and technical support straightforward
Web Browser and VT100 emulator provide access to provisioning systems, while
Web Browser also allows for retrieval of information from the Intranet/Internet
Support of Bluetooth, RS-232, USB-compatible and 10/100BaseT interfaces provide a choice of local connectivity to the TestPad
Support of Ethernet, 802.11b, analog and wireless modems (CDPD, CDMA, etc.) allow for various LAN and WAN connectivity options
Customizable and preconfigured test scripts offer support for closeout tests, ensuring that M&Ps are followed
Storage and transfer of results provide ability to store files on the test set and transfer them to computers and other network locations via file transfer protocol (FTP)
Non-display version offers a lower cost solution for customers that want to rely on laptop’s display for test configuration and retrieval of results

If you’re selling your JDSU FST-2802 please fill out form on the right hand side of page.

If you’re looking to Sell JDSU FST-2802 2000 TestPad FST-2000

FST-2802 Gigabit Ethernet Services Module
The FST-2802 is a handheld Ethernet, Fibre Channel, and IP services test instrument designed to meet the needs of service providers for turning up and troubleshooting these various services. The FST-2802 enables technicians to use one test set to turn up services ranging from 10/100 Ethernet, Gigabit Ethernet, Fibre Channel, and IP – all from a single TestPad module!

Highlights

Full line rate traffic generation with variable traffic load characteristics to stress test 10/100/1000 Mbps Ethernet interfaces.
Ability to test 1.0625 and 2.125 Gbps Fibre Channel services at 100% wire speed.
IP ping and traceroute testing for verification of network connectivity.
Ability to perform IP throughput verification and round trip delay testing.
Filtering capabilities at L2 and L3 enable users to perform circuit troubleshooting.
Dual-port capability for Ethernet and Fibre Channel traffic generation.
BER testing at layer 1 and layer 2 for Ethernet and Fibre Channel circuits.
Loopback frame generation to automatically loop the far-end test at L2 and L3.
Remote graphical user interface (GUI) application for remote testing via an analog modem, Ethernet LAN, 802.11, or Bluetooth.
Custom and preconfigured test scripts ensure that M&Ps are followed.

Applications

Service level agreement (SLA) verification via throughput, frame loss, and round trip delay testing for Ethernet, Fibre Channel, and IP services.
Automated RFC-2544 conformance testing. (Requires another FST-2802 module or loopback device)
Traffic testing with VLAN 802.1Q, 802.1p, DSCP, and TOS prioritization characteristics.
Ping and traceroute testing for verification of network connectivity.
Simultaneous testing of two independent circuits with full line rate traffic generation.

Key Features

Microsoft Windows XP platform with easy-to-use GUI.
Variety of applications such as web browser, PDF reader, and online keyboard.
File transfer protocol (FTP) for storage and transfer of results.
Connectivity methods include RS-232, USB, LAN, Bluetooth, 802.11b, and analog modem.

FST-2000 TestPad Mainframe

The FST-2000 TestPad is the user interface for the TestPad family. The combination of a user interface and an application module represents a complete test tool. This architecture provides TestPad users with the flexibility to invest in additional test modules as their testing needs change, allowing them to capitalize on an investment already made.

The FST-2000 has been designed for mobile technicians to improve the overall installation and troubleshooting process by providing features that are enablers for a total process improvement solution. The FST-2000 employs wireless connectivity, along with a local Web Browser and VT100, allows for storage and transfer of files, all of which enable field technicians to complete their jobs more effectively.

Buying, Selling, Trading JDSU FST-2802

Features:

Remote control via Web Browser makes remote testing and technical support straightforward
Web Browser and VT100 emulator provide access to provisioning systems, while
Web Browser also allows for retrieval of information from the Intranet/Internet
Support of Bluetooth, RS-232, USB-compatible and 10/100BaseT interfaces provide a choice of local connectivity to the TestPad
Support of Ethernet, 802.11b, analog and wireless modems (CDPD, CDMA, etc.) allow for various LAN and WAN connectivity options
Customizable and preconfigured test scripts offer support for closeout tests, ensuring that M&Ps are followed
Storage and transfer of results provide ability to store files on the test set and transfer them to computers and other network locations via file transfer protocol (FTP)
Non-display version offers a lower cost solution for customers that want to rely on laptop’s display for test configuration and retrieval of results

Agilent HFCT-5611 Module

The HFCT-5611 complies with Annex F of the GBIC specification Revision 5.4 and reaches 10 km with 9/125 µm single mode fiber. Both the HFBR-5601 and the HFCT-5611 are Class 1 Eye Safe laser devices. The HFCT-5611 is based on 1300 nm long wavelength Fabry Perot laser technology.

550 m with 50/125 µm MMF
550 m with 62.5/125 µm MMF
10 km with 9/125 µm SMF

Avago AFBR-5601Z Module

The AFBR-5601Z complies with Annex G of the GBIC specification Revision 5.4. In the 1000 BASE-SX environment the AFBR-5601Z achieves 220 m transmission distance with 62.5 µm and 500 m with 50 µm multimode fiber respectively. The AFBR-5601Z has been developed with 850 nm short wavelength VCSEL technology.

500 m with 50/125 µm MMF
220 m with 62.5/125 µm MMF

If you’re selling your JDSU FST-2802 please fill out form on the right hand side of page.

If you’re looking to Sell JDSU FST-2802 Precision Infrared IR Thermometer

FST-2802 Gigabit Ethernet Services Module
The FST-2802 is a handheld Ethernet, Fibre Channel, and IP services test instrument designed to meet the needs of service providers for turning up and troubleshooting these various services. The FST-2802 enables technicians to use one test set to turn up services ranging from 10/100 Ethernet, Gigabit Ethernet, Fibre Channel, and IP – all from a single TestPad module!

Highlights

Full line rate traffic generation with variable traffic load characteristics to stress test 10/100/1000 Mbps Ethernet interfaces.
Ability to test 1.0625 and 2.125 Gbps Fibre Channel services at 100% wire speed.
IP ping and traceroute testing for verification of network connectivity.
Ability to perform IP throughput verification and round trip delay testing.
Filtering capabilities at L2 and L3 enable users to perform circuit troubleshooting.
Dual-port capability for Ethernet and Fibre Channel traffic generation.
BER testing at layer 1 and layer 2 for Ethernet and Fibre Channel circuits.
Loopback frame generation to automatically loop the far-end test at L2 and L3.
Remote graphical user interface (GUI) application for remote testing via an analog modem, Ethernet LAN, 802.11, or Bluetooth.
Custom and preconfigured test scripts ensure that M&Ps are followed.

Applications

Service level agreement (SLA) verification via throughput, frame loss, and round trip delay testing for Ethernet, Fibre Channel, and IP services.
Automated RFC-2544 conformance testing. (Requires another FST-2802 module or loopback device)
Traffic testing with VLAN 802.1Q, 802.1p, DSCP, and TOS prioritization characteristics.
Ping and traceroute testing for verification of network connectivity.
Simultaneous testing of two independent circuits with full line rate traffic generation.

Key Features

Microsoft Windows XP platform with easy-to-use GUI.
Variety of applications such as web browser, PDF reader, and online keyboard.
File transfer protocol (FTP) for storage and transfer of results.
Connectivity methods include RS-232, USB, LAN, Bluetooth, 802.11b, and analog modem.

FST-2000 TestPad Mainframe

The FST-2000 TestPad is the user interface for the TestPad family. The combination of a user interface and an application module represents a complete test tool. This architecture provides TestPad users with the flexibility to invest in additional test modules as their testing needs change, allowing them to capitalize on an investment already made.

The FST-2000 has been designed for mobile technicians to improve the overall installation and troubleshooting process by providing features that are enablers for a total process improvement solution. The FST-2000 employs wireless connectivity, along with a local Web Browser and VT100, allows for storage and transfer of files, all of which enable field technicians to complete their jobs more effectively.

Buying, Selling, Trading JDSU FST-2802

Features:

Remote control via Web Browser makes remote testing and technical support straightforward
Web Browser and VT100 emulator provide access to provisioning systems, while
Web Browser also allows for retrieval of information from the Intranet/Internet
Support of Bluetooth, RS-232, USB-compatible and 10/100BaseT interfaces provide a choice of local connectivity to the TestPad
Support of Ethernet, 802.11b, analog and wireless modems (CDPD, CDMA, etc.) allow for various LAN and WAN connectivity options
Customizable and preconfigured test scripts offer support for closeout tests, ensuring that M&Ps are followed
Storage and transfer of results provide ability to store files on the test set and transfer them to computers and other network locations via file transfer protocol (FTP)
Non-display version offers a lower cost solution for customers that want to rely on laptop’s display for test configuration and retrieval of results

Agilent HFCT-5611 Module

The HFCT-5611 complies with Annex F of the GBIC specification Revision 5.4 and reaches 10 km with 9/125 µm single mode fiber. Both the HFBR-5601 and the HFCT-5611 are Class 1 Eye Safe laser devices. The HFCT-5611 is based on 1300 nm long wavelength Fabry Perot laser technology.

550 m with 50/125 µm MMF
550 m with 62.5/125 µm MMF
10 km with 9/125 µm SMF

Avago AFBR-5601Z Module

The AFBR-5601Z complies with Annex G of the GBIC specification Revision 5.4. In the 1000 BASE-SX environment the AFBR-5601Z achieves 220 m transmission distance with 62.5 µm and 500 m with 50 µm multimode fiber respectively. The AFBR-5601Z has been developed with 850 nm short wavelength VCSEL technology.

500 m with 50/125 µm MMF
220 m with 62.5/125 µm MMF

If you’re selling your JDSU FST-2802 please fill out form on the right hand side of page.